Maintenance of the slaughter line is important for the production of the slaughter line. The slaughter line will have some normal wear during the production process. Therefore, maintenance is especially critical. The following describes the maintenance methods for the parts of the slaughter line:
1. Maintenance method of the head motor:
The slaughter line must not be filled with water, as this may cause damage to the motor and affect its use. It also shortens the life of the slaughtering equipment.
2, the maintenance method of the chain:
The chain of the slaughtering line may cause the original lubricating oil to evaporate after long-term operation, which may cause the chain of the slaughtering line to be unbalanced during operation, increase in noise, and crawl. Add butter or a thicker lubricant to the chain.
3. Maintenance and maintenance methods for the slaughter line head reducer:
***Use the oil in the gearbox for about three months, clean the inside of the gearbox with diesel or gasoline, and add the new lubricant to the middle of the observation window. It will be fine to change the oil every year in the future. Too much lubricating oil may cause the gearbox to heat up. If the motor load is too large, the motor protection switch will trip. Too little lubricating oil may cause the gearbox to heat up, the noise increases, and the gearbox is hanged and scrapped.
Beijing Chavesi Machinery Manufacturing Co., Ltd. mainly produces slaughtering equipment, slaughtering lines, hair removal machines and other equipment. The company's slaughtering equipment is constantly improving and improving its technology. It is very popular among major food factories. Everyone wants to know more about slaughtering. For equipment knowledge, welcome to Beijing Chavez Machinery Manufacturing Co., Ltd. to inquire and consult!
1.ZF series of reflective shadowless lamp is widely used in various occasions operation lighting needs, is the ideal lighting equipment of modern operation room.
2. Full close streamline lamp body design completely meets the demand of the sterilization and high standard of laminar flow purification in operation room.
3. Adopting more than 5280 slices of reflection mirror, guaranteeing 1200 mm lighting depth.
4. Special design of color temperature compensation provides closer to that of natural sunlight and helps the doctor to distribute operation parts clearly and accurately.
5. The back-up battery will start work within 0.2 seconds automatically in case the main battery is damaged,ensuring the continuation of surgical operation. There`s failure indication in the handle control panel, to recommend the bulb to be changed after operation.
6. detachable handle jacket ,can be used for high temperature (â‰¤134â„ƒ)sterilized.
7. Digital-control circuit offers many functions, with 10 segment brightness selection stepless lighting regulation, brightness memory, low voltage
start-up and power on self test etc.
8. The life-span of OSRAM halogen bulb is up to 1500 hours; the bulbs can be changed easily.
9. Germany ORSAM lamp socket,thermostability
10.Balance arm can be optional Germany imported or domestic.
11. mould Die-casting Eight edge type Revolving arm.
Double Dome Halogen Operating Light,Double Dome Halogen Operating Light,LED Halogen Light,Double Dome Halogen Operating Lamp,Double Dome Operating Lamp
Shandong qufu healthyou Medical Technology co.,Ltd , http://www.kangerjian-medical.com