After the bacterial bag is full, a plastic film is added to the surface of the barrel to form a woven bag. The old inner tube of the bicycle is used to fasten it over the wall of the barrel, and then the fire is heated under the barrel. At the start of the fire, the fire broke out. When the plastic film at the top of the drum bulged, it was timed (100 °C in the sterilizer), and it continued to burn for 14 to 16 hours. Then the heat sterilization was stopped. During the sterilization process, the fire should be fired in the middle after the pre-attack, that is, when the fire is started, when it reaches 100°C, it is continued for another hour, and then it is kept at 100°C. Within 1 hour before the end, it is still burnt with fire. .
After sterilization, when the temperature of the stove falls below 70°C, the pan can be panned. The sterilized bag is placed in a clean room and cooled. When the bag temperature drops below 30°C, it can be inoculated under aseptic conditions.
Creation of aseptic conditions: The easiest method at present is to use plastic film to weld the same inoculation net as the net, hang it up in four corners, and move the sterilized material bag and bacteria (using 75% alcohol to scrub the outer wall) to the inoculation In the account, the bottom of the account is rolled inwards and pressed tightly with a material bag. The door is affixed with two-sided stickers, and "mushroom protection number 1" or 5 mg of potassium permanganate plus 10 grams of formaldehyde per cubic meter of space is used. Disinfection was carried out. The disinfectant was placed in a porcelain dish and ignited for 30 minutes after being sterilized by fumigation and then inoculated. The vaccinator should change the clean clothes before entering the inoculation account. Inoculation tools such as inoculation shovel (inoculated shovel can be made of stainless steel bar or bicycle spokes, etc.) first soaked in 75% alcohol solution for 5 minutes, then the bacteria species (bags or bottles) The old strains were excavated. The sterilized material bags were opened and the strains were rapidly transferred to them. The lines were sealed again and then another bag was used until the inoculation was completed. During the inoculation, avoid walking around freely, and do not enter and leave at random. Otherwise, it is very easy to infect the bacteria and cause losses.
(3) Fungal management: According to the physiological characteristics of Pleurotus eryngii, although it can grow below 35°C, it should be controlled at the optimum temperature of 24°C～26°C. Insulation can be adopted when the temperature is low, and the temperature should be reduced when it is high. 7 to 10 days inspection of the bag once, found that green, red, black and other mold should be singled out for treatment. The indoor air humidity of the bacteria-producing bacteria should be maintained at about 60%. If the humidity is high, proper ventilation can be performed to adjust it. Generally, the culture can be carried out for 30 to 35 days, and the mycelium of Pleurotus eryngii can be covered with a bag. The draft is provided by Han Chaozheng, Institute of Edible Fungus, Binhai County, Jiangsu Province, China. Tel: 0515-4103012 13851113822
Wet Wipes
Our main products are wet wipes serries: Baby wipes, female care wipes,industrial wet wipes, restaurant towels, bamboo wipes, Sanitary Napkin,diapers...etc. Our advantage is 1) Free samples, 2) Dispoable use, 3) Alcohol free, 4) PH balanced,
5) Dries in seconds and leaves your skin feeling fresh
Tianjin Jiao rou sanitary product company with these years factory running, we have trained the skilled teams and can offer you the best service as well as strong support! Our workshop have skilled workers to run over ten fullly & bigger automatic machineries in 100, 000 grade non-germ very clean workshop to make sure the goods quality! And our R&D department can support you on the artworks design as well as the new items development!
We are wet wipes specialist!
We could supply twoy kinds of wet wipes, it includes celaning wet wipes and Baby Wet Wipes.
Spunlace nonwoven
Ingredient
spunlace grid-embossed nonwoven, RO purified water, emolient
Material
Weight
can be customized
Size
can be customized
Two kinds as below:
1> Baby wet wipe
Cleaning wipes:
Why Choose Us
Brief:
* Professional with many years experience from 1996
* Brand: Zhen fang
* Most competitive price from material supplier base on huge orders to them.
* Experienced and Effective inner cost control system through whole process.
Quality Control:
* Twelve quality control staff, monitor in production line
* Providing relative solution
* Testing from material to final products according to international standard
* ISO approved factory
Service:
* OEM / ODM service and support
* Free Sample Development
* Free Promotion Material mixed with container
* Clients Service One-to-One
* Effective Communication within 24 hours
* Attend Canton Fair to meet customer face to face
* New design and style collection updating for customer
FAQ
1.Are you a trade company or a manufacturer?
A: We are an ISO approved manufacturer specialized in Baby Diaper, Sanitary Napkin, Adult Diaper and other Hygiene Products. OEM & ODM service are available.
2.What is your MOQ?
A: Mix 2 Size in 20FT, and 4 Size in 40HQ container. Support LCL
3.What is your delivery date?
A: The delivery date is about 5-15 days after receipt of payment.
4.What is your payment terms?
A: 30% deposit in advance and 70% balance before shipment.
5.Can you send free samples?
A: Yes, free samples are available; you just need to pay the express fee. You can provide your a/c like DHL, or you can call your courier to pick up from our office.
Wet Wipes
Wet Wipes,Adult Wet Wipes,Biodegradable Wet Wipes,Non Woven Wet Wipes
Tianjin Jiao rou Sanitary product company , http://www.tjsanitary.com