Six key technologies for production

Six key technologies for production

I. Precautions for breeding crickets:

A. It is forbidden to use pesticides, limes, and other toxins in the farm to prevent poisoning.

B. It is forbidden to feed chickens, ducks, and other carnivorous animals in the farm to protect the cockroaches and small clams.

C, in the entire take-up operation and processing process, avoid contact with the iron, otherwise it will turn blue and can not be used.

D. If the gland is empty after catching the ear, this line has scratched the pulp. It should be released immediately to reproduce.

E, scraping mustard must pay attention to, there must be no slurry into the eye, once accidentally entered the eyes, should immediately rinse with water or squeeze the Lithospermum juice, point, or find a doctor to treat, or the eyes are swollen after the blind, so be sure be careful.

II. Preliminary preparations for breeding clams

A. Preparation for breeding grounds:

A one-to-one-meter-high fence is built around the breeding grounds, where aquaculture ponds can be set up.

Spawning ponds and hatching ponds. There must be lawns or vegetable plots around the rearing pond for predatory habitat. Lights should be installed in the site and insects should be preyed at night.

2.5 meters long, 1.5 meters wide and 0.5 meters high in a strip pool in the room surrounded by glass. The bottom of the tank is cemented and has a certain slope. Each tank is provided with a sewer for easy flushing.

Lighting equipment is installed above each pond for lighting at night.

B. Preparation for farming utensils:

Raising utensils is relatively simple. The main ingredients are crispy clips: the crispy clips can be purchased from the company's copper and aluminum clips, and can also be homemade bamboo clips. Select a high-quality bamboo tube that is 20 centimeters long and five to seven centimeters in diameter, and cut in half in two halves. On the same side, they are hinged together (iron hinges are to be placed on the outside of the bamboo tube), and then a tension spring is placed on the outer side. When the hand is released, it is a composite cylinder. When the hand is released, it is due to the pulling force of the tension spring. The bamboo tube is divided into two halves.

C. Preparation of raising feed:

The larvae's bait is plankton, which can be used to feed pig dung, vegetable waste, slaughterhouses, waste from food factories, bran, etc., into plankton, which can feed on plankton; Various plants are planted and light is used to attract insects at night, and manure can be accumulated in the farm to feed the insects.

D. Preparation of aquaculture technology

Breeding techniques are very simple, mainly stripping technology, and generally can be learned in a few hours.

E, introduction of breeding quail:

Introduced generally do not need preparation, can be caught in the wild.

Third, on the problem of undressing

Stripping is not complicated, anyone can learn within 1-2 hours, and the key is to master the scientific method.

First of all, we must choose adult and healthy fleas. We generally require more than 80 grams of full-fledged limbs, and there should be no obvious patterns in abdomen and extremities.

Secondly, when catching cockroaches, attention should be paid to the following: catching cockroaches should be dissipated, and it should not be stuffy in bags and other items for a long time. Do not feed any food to undressed cockroaches. Keep the floor temperature of the farm tanks and spray it twice a day. water.

蟾蜍 Striping should have a suitable climate, and the most appropriate temperature is around 20°C. Therefore, the best period of stripping is from April to the end of October. Stripping can be done indoors and artificial warming is also used.

Fourth, the artificial breeding

1. Construction site: A one-to-one-meter-high wall is set up around the breeding site, where aquaculture ponds, spawning ponds and hatching pools can be set up. There must be lawns or vegetable plots around the rearing pond for predatory habitat. Lights should be installed in the site and insects should be preyed at night.

2. Breeding: The quail is oviparous and has strong reproductive ability. When the water temperature is about ten degrees Celsius and the relative humidity of the atmosphere is about 90 percent every year, the number of eggs laid per female is about 5,000 eggs. The eggs are arranged in two rows in a tubular glial egg band. The eggs are wrapped around the plants. The eggs can be placed in the hatchery for artificial incubation. The water temperature during incubation is maintained above 10 degrees Celsius and the water depth is adjusted at any time to control the water temperature. Cold weather and other bad weather can be covered with plastic film cover.

3, management: breeding quail, according to its different stages of development feeding divided by groups, to maintain adequate food. The larvae's bait is plankton, which can be used to feed pig dung, vegetable waste, slaughterhouses, waste from food factories, bran, etc., into plankton, which can feed on plankton; Various plants are planted and light is used to attract insects at night, and manure can be accumulated in the farm to feed the insects.

Fifth, the wolfberry collection and processing technology

1, making crispy clips: Crisp clips can be purchased to the company's copper, aluminum clips, can also be homemade bamboo clips, select a section of twenty centimeters long, five to seven centimeters in diameter of high-quality bamboo, split in half, in two halves On the same side, they are hinged together (iron hinges are to be placed on the outside of the bamboo tube), and then a tension spring is placed on the outer side. When the hand is released, it is a composite cylinder. When the hand is released, it is due to the pulling force of the tension spring. The bamboo tube is divided into two halves.

2. Collection: The time for taking the crisp is to receive late autumn every year, net catch or catch, and then focus on taking the crisp. When taking crisps, wash first

The net body of the earth, dry moisture, and then clip the ear glands with a crisp clip, appropriate force a squeeze, there will be a white lotion sprayed to the crisp folder on the inner wall, do not force too much, otherwise it will cause bleeding, pollution 蟾To make the appearance of quality decline, crisp edge is too sharp and often will cause bleeding, the edge of the crisp clip can be polished properly. After the licking of the right and left ears of the crickets is completed, the pupa is still able to grow normally. Generally, the pupa should be placed in fields and lawns 50 meters away from the pond and should not be put into the water immediately to avoid wounds. Infected and died of infection. Orchards and vegetable fields with pit ponds can also be stocked artificially and cultivated, which can be used to eliminate pests, as well as to increase the income of eucalyptus.

3. Processing: When taking the crispy process, when the jelly-like jelly sticking on the inner wall of the crispy clip has about 20 to 30 grams, the bamboo stick is used to scrape the stick into a ball, and the saliva is stained on the finger. , Like kneading dough, it is repeated and squeezed, and the hard skin and lump in the dough group are pinched and formed into a homogenous shape. Then, a round cake shape with a diameter of about five centimeters is formed and dried on a white cloth. In the process of taking crisps, processing, and drying, the pudding cannot contact the ironware, otherwise it will turn black and affect the quality. When the syrup is dry to brown or reddish-brown or reddish-brown translucent, it becomes a valuable traditional Chinese medicine.

Sixth, the deterrence stripping collection technology:

Every year, shelling takes place one or two times. Once the shell is grown up, once it is shelled, it is eaten off and eaten. Therefore, people only know that there are hard-to-get and hard-to-collect reasons. After the Qingming period, the clams went ashore to feed and breed. Afterwards, it was the best collection period for the clams. Because from the shore to the mans, the breeding, rest and feeding periods have basically been completed. The temperature has reached above 25°C, and there have been a large number of cicada insects. Breeding, a wide range of food sources, and strong corpses, should immediately begin preparations for the collection of concrete clothing.

1. 2.5 meters long, 1.5 meters wide and 5 to 5 meters high in a strip pool in a glass enclosure. Lighted from the bottom of the tank, with a certain slope. Each tank is provided with a sewer to facilitate flushing.

Lighting equipment is installed above each pond for lighting at night.

2. Put more than one hundred grams of aquaculture tanks, complete limbs, and no scars on the abdomen back into the stripping pool. Rinse the body's dirt with water. After the water is dry, spray the pure Chinese medicine preparation “striping prime”. In general, peeling begins after 100 hours, that is, four days.

3, before taking off their clothes, they must observe their various symptoms at any time. Generally, when they are stripped, they will show signs of being outliers, staying alone, unresponsive, and the appearance of wetness, etc. These symptoms will be reversed. They will begin to undress in about 10 minutes.

4. When undressing, it usually begins with the back, followed by the head, hind legs, abdomen, and front legs. When it completes three legs, that is, the rest of the other parts have been removed. When there is a front leg, it is immediately grasped by hand, and the remaining part is gently pulled down, and the mouth is opened. Eating out but not yet having enough time to take it out is a complete dress.

5. The clothing that has just been taken off has mucus, which should be immediately rinsed clean with fresh water, and then the stainless steel tweezers should be used to gently pull the sample into a specimen that has been prepared with a length of 25 cm and a width of 12 cm. When pulling the specimen, the force should be light, do not pull or pull, or affect the quality of the product. After the specimens are prepared, they should be placed in the room to be dry or placed in an infrared sterilizing cabinet to dry them. Generally, 90% of the dried products are finished products, which are sealed and stored or sold.

6. Take off the clothes and put two in another pool. When the body is dry, scrape the buns or put them back into the culture pond. If there is enough food, keep them well and you can take them before the fall or hibernation. In the short term, it is no longer possible to take clothes. Because the clothing that is taken out in less than four months is thin and thin, the medicinal value is not large, and it is difficult to finish the molding. There is no commodity value.

Source: Using Training Technology

1.Nitrile Glove is widely used in Medical surgical ,Medical examination for hospital, Industry ,Electronic ,Foods,homelife etc.

2. Nitrile glove ,there are different col.,blue,purple ,pink ,yellow, white and so on.

3.medical grade and industrial Grade nitrile glove

4.stretch 

5.Free latex ,not allergic

6.good handfeeling

7.finger or all ballast-surfaced

8.ambidiextrous

Nitrile Glove

Nitrile Glove

Nitrile Glove,Cheap Nitrile Gloves,Nitrile Gloves Black,Safety Gloves

Zibo Hongye Shangqin Medical Science and Technology Co.,Ltd. , http://www.vinylgloves.cn

Posted on