How to Turn Ahead When Farm Machinery Works in the Field

When agricultural machinery such as tractor units and combine harvesters are used for field operations, turning and reversing operations are very frequent. It not only affects the unit's operating efficiency, but also increases the wear of the steering system and the walking system and other operating system components. For this reason, the operator should Pay attention to the following points: 1. According to the shape, size, and variety of crops in the field, choose a reasonable walking route (such as a ploughing method, etc.) to minimize reversing, that is, to reduce idle travel, in order to help improve operating efficiency. 2. Before turning and reversing the unit, the unit must be raised and the working parts of the agricultural implement stopped. If the farm implement is still turning or reversing under the condition of entering the soil, the turning radius will be increased, the load of the engine will be increased, and the farm machinery will be easily damaged. 3. It is forbidden to "turn dead bends." Because the turning angle is too small, soil pile-up phenomenon is likely to occur, resulting in uneven field surface, thus reducing the quality of operations. 4. For narrow rectangular plots, it is best not to turn or turn the head, but to use the reverse method to complete the arable land, soil preparation or harvesting operations, or reduce the operating efficiency of the unit due to excessive number of headings. 5. When the wheel-type tractor unit crosses the hard and high field ridge, the rear tire of the tractor is larger in diameter than the front wheel, so the farm implement should be raised and reversed. 6. Track-type tractors do not habitually always turn in the same direction when working in the field. As far as conditions permit, the direction of turning must be changed frequently to avoid severe unilateral wear on the steering clutch.

Dingmin Pharmaceutical supply Brexpiprazole API and Brexpiprazole Intermediates with high purity and best price. The main products CAS No are as follows: 5118-13-8, 66490-33-3, 913614-18-3, 70500-72-0, 913613-82-8. Sample can be sent if you request.

Welcome to do business with us. Please email to us directly.

Brexpiprazole Intermediates

Cas 5118-13-8,Brexpiprazole Intermediates,4-Chloro- Benzo

Shijiazhuang Dingmin pharmaceutical Sciences Co.,Ltd , http://www.dingminpharma.com

Posted on