Threshing machine installation and use

1. The thresher should be mounted on a thick and consistent wooden frame and securely fastened with screws. The push button switch should be safe and protected against electric shock when it is convenient for operation; with the diesel engine as power, the diesel engine should also be fixed firmly so that the center distance of the two pulleys is kept at a distance of 1.5-2 meters.

The opening of the thresher should be approximately the same as the natural wind direction. If a diesel engine is used as a power source, the installation of the diesel engine should be contrary to the exit of the straw. Before the feeding stage, square tables or plankings, which are the same as the feeding stage, should be placed so as to stack the fed crops.

2. Use the appropriate pulley according to the instruction manual. If dry wheat is used, the outer diameter of the motor pulley is 120 mm, and the outer diameter of the roller pulley is 135 mm.

Before starting the machine, the bearing should be added with butter, check the inside of the machine for debris, and tighten the connecting bolts. Pull the pulley to hear if there is friction noise. If it should be overhauled, then drive and test it.

3. The amount of feed should be increased or decreased according to the dry and wet conditions of the crop and the length of the stem. If it is found that the broken rate is high, the gap between the roller and the concave plate should be increased, and the roller pulley should be replaced.

The crops should be fed one after the other. If a twisting rope occurs, stop the feed immediately and feed it after the gallows disappear. If a blockage occurs, stop it immediately to eliminate it.

4. It is forbidden to feed hard objects such as metal, tools, wooden blocks, stones, etc. into the machine to avoid damage to the machine and injury; after each operation, it is necessary to idle for a few minutes before stopping.

When used as a weed, remove the top cover, pull out the two hanging plates of the concave plate, pull one end of the concave plate out of the box about 50 mm, and press the hole to install the file, the direction of the knife edge should be the same, and then put it. Then pull the indentation plate out of the box 50 mm from the other direction, install the sacral knife in the same way and put it back in place. Finally, install the boom and cover.

Hyaluronic Acid Eye Drops Sodium Hyaluronate (HA), Pure Hyaluronic Acid could be used in eye surgery, such as Hyaluronic Acid Eye Drops, corneal transplantation, cataract surgery, glaucoma surgery, and surgery to repair retinal detachment.

Eye Drop Grade Hyaluronic Acid Powder is an important component of intercellular substance, eye vitreous body, joint fluid and other connective tissue. It acts the important physiologic roles in holding body's moisture, maintaining extracellular space, adjusting osmotic pressure, lubricating and promoting cells to repair in the body. Sodium Hyaluronate can be used as viscoelastic agent inintraocular lens implantation operation, as the filler in the osteoarthritis and rheumatoid arthritis and otherjoint surgery, as a medium widely used in eye drops, it also can be used to prevent postoperative adhesion and facilitate the wound heal. The compounds formed by the reaction of Sodium Hyaluronate with other drugs play a drug release effect role, thus achieve the purpose of drug targeted and time controlled release.

With the development of medical technology, Sodium Hyaluronate has been more and more widely used in medical applications. In 1976, Sodium Hyaluronate was first commercialized and used as ophthalmic viscoelastic agents, which is a significant progress in the ophthalmic industry. In 1987, Sodium Hyaluronate for intra-articular injection came in to the market. In 1990s, the large-scale production of Sodium Hyaluronate by fermentation made the cost lower, thus products containing Sodium Hyaluronate such as eye-drops, dermal fillers and other Sodium Hyaluronate preparations started to be used extensively.

Specification

Eye Drop Grade Hyaluronic Acid Powder

Pure Hyaluronic Acid Powder,Hyaluronic Acid Eye Drops,Hyaluronic Eye Drops,Eye Drop Grade Hyaluronic Acid Powder

Qufu Hi-Tech Trading Co., Ltd. , https://www.chinahyaluronic-acid.com