After the agricultural motor is flooded or immersed in water, inspection and repair shall be carried out immediately to remove the water and impurities therein so as to prevent damage or scrapping. Specific maintenance methods are as follows:
1, remove the external sludge, impurities, but do not rotate the motor shaft. 2, remove the boot body, clean the shell cavity, rotor and slip ring on the sludge and water stains, check whether the winding off the weld, the brush is rust in the brush slot stuck, the brush pressure is normal, brush and If the surface of the slip ring is tight, faults should be eliminated if found.
3. Dry the windings. It can be baked with incandescent bulbs, or it can be air-dried naturally. However, it must not be heated by current or baked by fire to prevent short circuits or damage to the insulation. After drying, the insulation properties of each wound coil must be checked with a megohmmeter or a multimeter. If it is found to have poor insulation, it should be overhauled. 4. Reassemble the body and perform trial operation. If there is no problem with the commissioning, you can put it into use.
1, remove the external sludge, impurities, but do not rotate the motor shaft. 2, remove the boot body, clean the shell cavity, rotor and slip ring on the sludge and water stains, check whether the winding off the weld, the brush is rust in the brush slot stuck, the brush pressure is normal, brush and If the surface of the slip ring is tight, faults should be eliminated if found.
3. Dry the windings. It can be baked with incandescent bulbs, or it can be air-dried naturally. However, it must not be heated by current or baked by fire to prevent short circuits or damage to the insulation. After drying, the insulation properties of each wound coil must be checked with a megohmmeter or a multimeter. If it is found to have poor insulation, it should be overhauled. 4. Reassemble the body and perform trial operation. If there is no problem with the commissioning, you can put it into use.
Dingmin Pharmaceutical supply Isavuconazole API and Isavuconazole Intermediates with high purity and best price. The main products CAS No are as follows:241479-67-4, 241479-73-2, 241479-74-3, 368421-58-3. Sample can be sent if you request.
Welcome to do business with us. Please email to us directly.
Cas 368421-58-3,Isavuconazole Intermediates,2-Amine Hydrochloride
Shijiazhuang Dingmin pharmaceutical Sciences Co.,Ltd , https://www.dingminpharma.com