When it comes to crushing, we pay more attention to the crushing of some common materials, such as Chinese medicine, chemicals, food, minerals, etc., but when crushed like PVC materials, high-toughness materials and temperature-sensitive materials, There are many problems, and the cryogenic freeze pulverizer is a good way to solve the crushing of these materials. Now the more common low-temperature means is to use liquid nitrogen for ultra-low temperature freezing. Because of the special properties of liquid nitrogen, it is easy to cause harm to the human body. Beijing Yanshan Zhengde Machinery Equipment Co., Ltd. puts forward several precautions on liquid ammonia freezing and crushing based on years of experience:
1. For heat sensitive materials and high toughness materials (such as plastics), the FDV ultrafine pulverizer can be equipped with liquid nitrogen tank for low temperature pulverization.
2. Liquid nitrogen is pulverized at a low temperature to match a liquid nitrogen container containing a liquid nitrogen pump.
3. When using, follow the steps below: a. The liquid nitrogen outlet is aligned with the feeding port to start the pulverizer; b. The liquid nitrogen control switch is turned on, and the liquid nitrogen flows into the pulverizing tank body, and then the feeding is performed.
4. When stopping, follow the steps below: a. Stop the power of the crusher after about half a minute to one minute after stopping the feeding; b. Turn off the liquid nitrogen control switch; c. Remove the liquid nitrogen tank for cleaning.
5. When cleaning, please wear thick gloves to prevent frostbite.
The above are some precautions in the use of the cryogenic freezer, hope to help you better use the crusher to better protect yourself.
1. For heat sensitive materials and high toughness materials (such as plastics), the FDV ultrafine pulverizer can be equipped with liquid nitrogen tank for low temperature pulverization.
2. Liquid nitrogen is pulverized at a low temperature to match a liquid nitrogen container containing a liquid nitrogen pump.
3. When using, follow the steps below: a. The liquid nitrogen outlet is aligned with the feeding port to start the pulverizer; b. The liquid nitrogen control switch is turned on, and the liquid nitrogen flows into the pulverizing tank body, and then the feeding is performed.
4. When stopping, follow the steps below: a. Stop the power of the crusher after about half a minute to one minute after stopping the feeding; b. Turn off the liquid nitrogen control switch; c. Remove the liquid nitrogen tank for cleaning.
5. When cleaning, please wear thick gloves to prevent frostbite.
The above are some precautions in the use of the cryogenic freezer, hope to help you better use the crusher to better protect yourself.
Short range distance sensors from JRT combine highly precise measurement results with quick and reliable response. Short distance sensor module use single-transmit and single-receive measurement technology and can be used to measure a distance or monitor the slow moving objects. For the laser pointer distance measure, also called optical range sensor, can measure legth, width, depth. Laser rangefinder transducer with rxtx has been widely used to industries.
Laser Distance Sensor Short Range,Short Range Sensors,Oem Laser Distance Sensor,Distance Sensor Laser
Chengdu JRT Meter Technology Co., Ltd , https://www.jrt-measure.com