Bitter gourd cultivation technology

1 selection of land preparation. The bitter gourd is suitable for spring sowing. Bitter gourd hi, wet, fertility, impatient, should choose the upper layer, fertility, etc., convenient drainage and irrigation plots. Before the site preparation, 5000 kg of farmyard fertilizer was applied per mu, 40 kg of nitrogen fertilizer, 50 kg of phosphate fertilizer and 30 kg of potassium fertilizer. Thirty centimeters of plough depth, leveling and snoring, and width of 1.6 meters.

2 germination sowing. Germination began around mid-March. Melon seeds were first soaked in warm water of 45°C-50°C, soaked for 24 hours after cooling, and then germinated under 30°C conditions after being expanded. The seeds were sown and germinated when the seeds were exposed to 50% white tip; Rolled into a cylinder with a diameter of 8 cm and a height of 10 cm, filled with nutrient soil and arranged in a seedbed. One seed was sown in each nutrient pot and watered immediately. After the water penetrated, 1 cm thick fine soil was sprinkled on it and then covered with plastic sheeting.

3 field management.

(1) The temperature in the nursery shed is maintained at about 30°C during the day and not less than 15°C during the night. The first true leaf to 4 true leaf phases should be ventilated and cooled at noon to maintain 25°C-30°C. In the 7 days to 10 days before transplanting and planting, water should be controlled to lower the seedbed temperature. Gradually increase the ventilation time until the film is completely uncovered.

(2) transplanting Dingmiao. The seedling age was planted in the field at the time of 5 leaves and 1 heart, and the suitable planting period was on April 25th. In the entire well, there are two rows of each row, with a 1.2-meter spacing and a 50-cm distance between the holes. Each hole is applied with about 20 grams of compound fertilizer, and 1600 -1,700 plants are planted on the acres.

(3) Set up the stand. When bitter gourd starts to pump vines, it is necessary to build a “person” bracket. The top of the rack should be connected with a crossbar. The fixed pole should use a bamboo pole with a length of 2.5 meters and a diameter of 3 centimeters. In the early period, attention should be paid to artificially tying up vines and assisting melons to get on shelves.

(4) Pruning fork. After the bitter gourd is put on the shelf, the main vine can not leave melons below 50 cm. The female flowers should be removed to facilitate the overall development. After the main vines have settled on 6 - 7 melons, leave 5 - 6 leaves topping and remove the remaining vines.

(5) fertilizer and water management. The bitter gourd grows for a long period of time and the collection period lasts for more than 3 months. Therefore, it is necessary to ensure adequate supply of water and fertilizers, especially during the full fruit period. In case of drought, water should be poured every 7 days. Before watering, it should be combined with urea or compound fertilizer 7 kg per mu -10 kg, in case of continuous rain, should pay attention to drainage; at the same time foliar spraying potassium dihydrogen phosphate 2 times to 3 times.

(6) Pest control. Diseases of bitter melon mainly include anthrax, which occurs more than in the middle and late stages. Control should be promptly removed from the residual, rotten, diseased leaves. Can also be used 50% thiophanate 800 times - 1000 times, or 70% of chlorothalonil wettable powder 600 times daily spray control in the early stages of the disease, insect pests mainly aphids, cabbage caterpillar, available emulsion 1000 times - 2000 times or 40% Dimethoate 1500 times foliar spray.

(7) Timely seed production. The fruits of a bitter gourd are mature one after another. During the prosperous period of melons, mature melons should be picked once a day; use scissors when picking them to avoid tearing them. At the same time, we must eliminate the mixed melons, choose the color and melon-shaped preserved seeds, and do the picking on the same day, take the seeds and wash them on the same day to ensure the seed germination rate.

Finished Products of varicella vaccine. It has three qualities,good safety of gelatin-free, long validity period by good stability, better protection with high titer and immune efficacy. These improvements enhanced the vaccine safety and quality, and established BCHT the leading position in varicella vaccine. We have two different packages, penicillin bottle and pre-filled syringe. And it has been exported to other countries, such as India, Philippines.
Penicillin BottlePre-filled

Finished Products

Finished Products Of Rabies Vaccine,Rabies Vaccine For Human Use,Live Biotechnology Chicken Pox,Live Lyophilized Vaccination

Changchun BCHT Biotechnology Co.,Ltd , https://www.ccbcht.net

Posted on