Analyze how to realize rapid determination of TZS series soil moisture analyzer

TZS series soil moisture measuring instrument is a professional instrument for rapid soil moisture measurement. It is convenient and quick to operate. It can directly display and display the soil moisture content. There is data stored directly on the host computer, and some models are connected to the computer. Some models have GPS function, the following will briefly introduce its operation method.

In the instrument, four AA batteries are installed, the soil moisture sensor is connected to the host, and all the soil moisture sensor probes are inserted into the test soil to begin operation.

Press the "Power" button to open the host, press the "measure" button for 2 seconds to display soil moisture, press the "Save" button to save the measurement information. Large-screen Chinese LCD display, film-type buttons, viewing results intuitive and convenient. In addition, this series of instruments can store data 2000 groups, press the "display" button to view the previous measurement information. It takes only one minute to complete a measurement and achieve a true rapid measurement.

Precautions

1. When the instrument is used, all the metal probes of the moisture sensor must be inserted into the soil and only a part of the probes must be inserted. The displayed data is inaccurate.

2. When inserting the probe, do not bury the plastic part in the soil so that moisture does not enter the sensor and cause a short circuit in the internal signal processor.

3. If you want to measure the moisture of deeper soil, please dig the land to the required depth and then measure it.

4. When inserting the probe, the plastic part of the sensor must be gripped, and the force is inserted vertically, and the force is incorrect, which will cause the probe to be bent and damaged.

5. When the sensor is removed after the measurement is completed, the plastic part of the sensor must be grasped by hand and then pulled out. Do not pull out the sensor by pulling the sensor wire.

6. After use, the soil stuck on the sensor should be wiped with a soft cloth. Do not put it in the water to clean the bath. Otherwise, the internal circuit of the sensor will be short-circuited.

Portable 3 Ply Disposable Masks Non-woven Face Mask With Elastic Earloops

Surgical Face Mask

Disposable Surgical Face Mask

Dongguan Anmeixuan Electronic Technology Co., Ltd , https://www.hyashine.com

Posted on