Maize harvest mechanization is one of the ten new technologies for agricultural mechanization that China has focused on during the 10th Five-Year Plan period. The different types of corn harvesting equipment developed and produced in various places in recent years are introduced as follows, for the majority of demanders to choose.
The 4YM-3 hanging corn harvester was developed by Tianjin Fukang Agricultural Development Co., Ltd. and Beijing Bideyi Electromechanical Technology Application Center. The machine is equipped with Tieniu-55, 654 and Qing-650 wheeled tractors as the supporting host. It adopts a new type of picking device. The structure of the front header is simple, the quality is small, and the work width is larger than the width of the whole machine, eliminating the need for Artificially assisted cutting slicing work procedures have the features of high work efficiency, low impurity rate, low crushing rate, etc. All performance indicators are in line with national standards.
The machine has a simple structure, convenient mounting, harvesting lines 3 lines, harvesting line spacing 500~700mm (adjustable), working speed 3~6km/h, grain loss rate ≤ 2%, ear loss rate ≤ 3%, grain Broken rate ≤ 1%.
The 4YL-1 corn harvester was developed and produced by the Agricultural Machinery Research Institute of Zhengzhou City, Henan Province and the Agricultural Machinery Factory of Zhengzhou City. This machine is used with Harvest-180, Shenniu-25 and Taishan-30 tractors for single-row harvesting. It can complete operations such as corn picking, ear transport, ear packing, and straw crushing.
The machine adopts the rear connection, the pick roller is placed on the right side of the tractor, and the landing of the straw crushing mechanism is controlled by the hydraulic lifting mechanism of the tractor. Dimensions (length, width, height) are 2850mm, 2300mm, 1600mm, machine quality is 550kg, grain crushing rate is <1%, ear loss rate is <3%, grain loss rate is <2%, and chopped passing rate is> 90%. The remaining height of 0~8cm, productivity 0.1~0.2(hm2/h).
4Y-2 corn cutting machine is developed and produced by the Laizhou Jinsheng Agricultural Machinery Research Institute of Shandong Province. The Model 2000-I is designed for use with 8.8 to 11.0 kW small four-wheel tractors, 2000-II models and 18.4 kW small four-wheel tractors. The whole corn can be harvested with roots without damaging corn cobs and corn stalks. The harvested corn is laid into strips and it has a good effect. The adaptability of the machine is good. It can work normally whether it is mountains, plains, sandy lands, standing or lodging corn.
The machine is compact in structure and has good maneuverability. The depth of cutting knife into the soil is generally 0~4cm below the surface and the production efficiency is 0.20~0.47hm2/h.
YT-4 corn thresher was developed by China Agricultural Engineering Research and Design Institute. The machine has the characteristics of low crushing rate, high de-purchase rate, convenient cleaning and low noise. Suitable for corn with lower or higher water content.
The machine consists of a feed section, a threshing section and a core section. Dimensions (length, width, height) are 2300mm, 880mm, 560mm, supporting power 32kW, spindle speed 245r/min, purging rate >99%, crushing rate <1%, productivity 8~10t/h, machine quality 440kg .
4YZ-3 self-propelled corn combine harvester This machine was developed by Zhaoguang Machinery Factory in Heilongjiang Province. The machine can harvest three rows of corn, and can complete operations such as corn ear extraction, transportation, hydraulic lifting, loading and stem return. With high harvest quality, easy maintenance and other characteristics.
The machine consists of a frame, a cab, a walking part, an ear picking device, a spike elevator, a collection box, a stem chopper, a hydraulic system, an electronic monitoring system, and an electrical part. Dimensions (length, width, height) 7700mm, 2280mm, 3450mm, machine quality 5800kg, engine model X6105BL7-20, productivity 0.6~0.9hm2/h, harvest line 3 lines, harvest line spacing 650-700, chopper type Hammer knife type, stem cutting length 100-150mm, ear box volume 4m3.
The 4YZ-3 silage corn combine harvester was jointly developed by Hebei Zhaoxian Agricultural Machinery Repair Factory and Hebei Agricultural Mechanization Research Institute. This machine is a self-propelled combine harvester with corn ear and stem harvesting. It has the features of novel design, reasonable structure, good operation quality and high production efficiency. It is maneuverable and flexible. It is suitable for small-scale operations and has a comparative advantage for the development of animal husbandry. Good application prospects.
The machine is mainly composed of abutment devices, headers, picking devices, auger conveyors, fruit boxes, ear elevators, conveying devices, and straw shredding devices. Dimensions (length, width, height) are 7000mm, 2190mm, 3420mm respectively, the number of harvested lines is 3 lines, the overall quality is 5500kg, the supporting power is 66.2kW, the line spacing is 600mm, the working efficiency is 0.53~0.80hm2/h, and the volume of the fruit box is 2m3 The minimum transition radius is 4.9m, the ear loss rate is ≤3%, the straw cutting rate is ≥90%, and the straw chopping length is 15~50mm.
The MB220 corn silage harvester was jointly produced by Zhaoguang Machinery Plant of Heilongjiang Province and the German company Mengele. This machine is used together with wheeled or tracked tractors of 25 kW or more. It is a machine for harvesting corn green fodder. It can complete feeding, chopping, throwing, and loading of silage corn at one time. It has a compact structure and quality. Small, high production efficiency and fine chopping quality.
The machine has a mass of 450kg, a working width of 2450mm, a cutting length of 5mm, a minimum spacing of 500mm, a rotor speed of 1460r/min, a working speed of 10km/h, and a productivity of 30t/h.
The 4YM-3 hanging corn harvester was developed by Tianjin Fukang Agricultural Development Co., Ltd. and Beijing Bideyi Electromechanical Technology Application Center. The machine is equipped with Tieniu-55, 654 and Qing-650 wheeled tractors as the supporting host. It adopts a new type of picking device. The structure of the front header is simple, the quality is small, and the work width is larger than the width of the whole machine, eliminating the need for Artificially assisted cutting slicing work procedures have the features of high work efficiency, low impurity rate, low crushing rate, etc. All performance indicators are in line with national standards.
The machine has a simple structure, convenient mounting, harvesting lines 3 lines, harvesting line spacing 500~700mm (adjustable), working speed 3~6km/h, grain loss rate ≤ 2%, ear loss rate ≤ 3%, grain Broken rate ≤ 1%.
The 4YL-1 corn harvester was developed and produced by the Agricultural Machinery Research Institute of Zhengzhou City, Henan Province and the Agricultural Machinery Factory of Zhengzhou City. This machine is used with Harvest-180, Shenniu-25 and Taishan-30 tractors for single-row harvesting. It can complete operations such as corn picking, ear transport, ear packing, and straw crushing.
The machine adopts the rear connection, the pick roller is placed on the right side of the tractor, and the landing of the straw crushing mechanism is controlled by the hydraulic lifting mechanism of the tractor. Dimensions (length, width, height) are 2850mm, 2300mm, 1600mm, machine quality is 550kg, grain crushing rate is <1%, ear loss rate is <3%, grain loss rate is <2%, and chopped passing rate is> 90%. The remaining height of 0~8cm, productivity 0.1~0.2(hm2/h).
4Y-2 corn cutting machine is developed and produced by the Laizhou Jinsheng Agricultural Machinery Research Institute of Shandong Province. The Model 2000-I is designed for use with 8.8 to 11.0 kW small four-wheel tractors, 2000-II models and 18.4 kW small four-wheel tractors. The whole corn can be harvested with roots without damaging corn cobs and corn stalks. The harvested corn is laid into strips and it has a good effect. The adaptability of the machine is good. It can work normally whether it is mountains, plains, sandy lands, standing or lodging corn.
The machine is compact in structure and has good maneuverability. The depth of cutting knife into the soil is generally 0~4cm below the surface and the production efficiency is 0.20~0.47hm2/h.
YT-4 corn thresher was developed by China Agricultural Engineering Research and Design Institute. The machine has the characteristics of low crushing rate, high de-purchase rate, convenient cleaning and low noise. Suitable for corn with lower or higher water content.
The machine consists of a feed section, a threshing section and a core section. Dimensions (length, width, height) are 2300mm, 880mm, 560mm, supporting power 32kW, spindle speed 245r/min, purging rate >99%, crushing rate <1%, productivity 8~10t/h, machine quality 440kg .
4YZ-3 self-propelled corn combine harvester This machine was developed by Zhaoguang Machinery Factory in Heilongjiang Province. The machine can harvest three rows of corn, and can complete operations such as corn ear extraction, transportation, hydraulic lifting, loading and stem return. With high harvest quality, easy maintenance and other characteristics.
The machine consists of a frame, a cab, a walking part, an ear picking device, a spike elevator, a collection box, a stem chopper, a hydraulic system, an electronic monitoring system, and an electrical part. Dimensions (length, width, height) 7700mm, 2280mm, 3450mm, machine quality 5800kg, engine model X6105BL7-20, productivity 0.6~0.9hm2/h, harvest line 3 lines, harvest line spacing 650-700, chopper type Hammer knife type, stem cutting length 100-150mm, ear box volume 4m3.
The 4YZ-3 silage corn combine harvester was jointly developed by Hebei Zhaoxian Agricultural Machinery Repair Factory and Hebei Agricultural Mechanization Research Institute. This machine is a self-propelled combine harvester with corn ear and stem harvesting. It has the features of novel design, reasonable structure, good operation quality and high production efficiency. It is maneuverable and flexible. It is suitable for small-scale operations and has a comparative advantage for the development of animal husbandry. Good application prospects.
The machine is mainly composed of abutment devices, headers, picking devices, auger conveyors, fruit boxes, ear elevators, conveying devices, and straw shredding devices. Dimensions (length, width, height) are 7000mm, 2190mm, 3420mm respectively, the number of harvested lines is 3 lines, the overall quality is 5500kg, the supporting power is 66.2kW, the line spacing is 600mm, the working efficiency is 0.53~0.80hm2/h, and the volume of the fruit box is 2m3 The minimum transition radius is 4.9m, the ear loss rate is ≤3%, the straw cutting rate is ≥90%, and the straw chopping length is 15~50mm.
The MB220 corn silage harvester was jointly produced by Zhaoguang Machinery Plant of Heilongjiang Province and the German company Mengele. This machine is used together with wheeled or tracked tractors of 25 kW or more. It is a machine for harvesting corn green fodder. It can complete feeding, chopping, throwing, and loading of silage corn at one time. It has a compact structure and quality. Small, high production efficiency and fine chopping quality.
The machine has a mass of 450kg, a working width of 2450mm, a cutting length of 5mm, a minimum spacing of 500mm, a rotor speed of 1460r/min, a working speed of 10km/h, and a productivity of 30t/h.
Fertigation is using your irrigator to fertilise the plants and soils as you water, which is the most efficient and advanced practice of fertilization. Aid of pressure system (or natural divide terrain), the soluble solid or liquid fertilizer, according to the soil nutrient content and crop fertilizer regularity and characteristics of species, with the fat of with irrigation water, through a controlled water supply pipeline system, supplying, the compatibility, water through the pipe and drop head form drip irrigation, uniform, regular, quantitative, infiltration area crop root growth and development, make the main root soil always stay loose and appropriate moisture content, at the same time according to different crop fertilizer characteristics, environment and soil nutrient content in soil; Crops in different growth phase water requirement, the different development stages of the fertilizer rule is the demand of design, the water and nutrient timing quantitative, provided directly in proportion to the crops.
Greenhouse Drip Irrigation System
Greenhouse Drip Irrigation System,Greenhouse Micro Irrigation System ,Plant Drip Irrigation
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , http://www.spgreenhouse.com