To ensure effective weed control when using herbicides, it's essential to follow several key practices. First, choose high-quality herbicide products from reputable manufacturers. Not all products are created equal—some may have better formulations and more reliable performance than others. When selecting a product, check the packaging for complete and clear labeling, including the production date. Ideally, the product should be no older than two years, preferably from 2007 or later. The liquid should be uniform when shaken, without signs of separation or caking, which could indicate poor quality.
Timing is also crucial. Apply the herbicide as early as possible—ideally 2–3 days after planting corn. This allows the chemical to form a protective layer on the soil surface before weeds germinate, ensuring maximum effectiveness. Delaying application can reduce the herbicide’s ability to control weeds, especially if weeds have already emerged. The earlier you apply, the better the results.
Another important step is managing wheat straw in the field. In many areas, corn is planted directly into fields where wheat straw has been left on the ground. This straw can interfere with herbicide coverage by blocking the chemical from reaching the soil. To improve effectiveness, consider removing a portion of the straw to allow the herbicide to make direct contact with the soil surface.
Increasing water usage during application can also enhance herbicide performance. Water acts as a carrier, helping the herbicide spread evenly across the soil. Higher soil moisture improves the distribution and effectiveness of the chemical. In dry conditions, especially in fields with heavy straw residue, increase the water volume to at least 30–45 kg per mu (approximately 667 square meters) to ensure proper coverage.
Avoid applying herbicides during unfavorable weather conditions. Rain within 24 hours of application can wash away the herbicide film, reducing its effectiveness and potentially harming the crop or contaminating the soil. Similarly, avoid spraying on windy or extremely hot days, as this increases the risk of drift, which not only reduces efficacy but can also damage nearby crops or the environment. It's best to spray in calm conditions, ideally before 11 a.m. or after 4 p.m.
Soil type also plays a role in herbicide performance. Clay soils tend to adsorb more chemicals, so use the upper end of the recommended dosage. Sandy soils, on the other hand, have less adsorption capacity, making them more prone to herbicide leaching, which can harm young plants. Therefore, use the lower end of the recommended dose for sandy soils.
Finally, always dilute the herbicide properly and apply it evenly across the field. Never exceed the recommended dosage, as this can lead to unnecessary costs and potential crop damage. Following these steps will help maximize the effectiveness of your herbicide application and ensure healthier, weed-free crops.
Suspension Parts
This classification mainly includes the aluminum alloy die casting Suspension Parts using in Auto area,the raw material is aluminum alloy.
In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.The Casting General Tolerance is Grade GB-CT4.
Process Technology: High pressure die casting,Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Machinery Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo
Die Casting Suspension Parts,Aluminum Suspension Parts,Automobile Suspension Parts
NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.casting-part.com