Test bench working mode

1, manual counting mode

Press the mode button to switch to the manual counting mode, and the corresponding mode indicator prompts. Press and hold the "forward" button or "back" button, the motor performs the corresponding "forward" or "reverse" action, and the motor stops when the button is released or moved to the limit point.

2, automatic counting mode

Press the mode button to switch to the automatic counting mode, and the corresponding mode indicator prompts. Press the “forward” button or the “reverse” button, the motor performs the corresponding “forward” or “reverse” motion, and moves to the limit point or the force value set point to automatically cycle back and forth until the number of round trips reaches the set number or press "Stop" button. The default value is 9999 times. Press the ↑ key to adjust the value of the corresponding digit.

3, pull and break mode

Press the mode button to switch to the manual timekeeping mode, and the corresponding mode indicator prompts. Press the "forward" button or the "back" button, the motor performs the corresponding "forward" or "reverse" action. When the force applied to the object disappears, it stops moving immediately or moves to the limit point to stop the motion.

4, automatic timing mode

Press the mode button to switch to the automatic timing mode, and the corresponding mode indicator prompts. Press the “Forward” button or the “Back” button, the motor will perform the corresponding “forward” or “reverse” motion. When it moves to the limit point or set the force value, it will automatically count down and return to the specified time. Press the "Stop" button to stop the motor. The default value is 5 seconds. Press the ↑ key to adjust the value of the corresponding digit.