1, the tip of topping technique points: 1) in mid-May before the flowering. 2) Leave 6-8 topping. [URL][/URL]
2. Auxiliary tip processing technology points: 1) Every 7 to 10 days. 2) The method can be any one of the following: removal of axillary shoots below the ear; 1~2 leaves of axillary shoots for continuous picking of the hearts; 1~2 axillae at the top of shoots, and all others removed.
3, ear tips technical points: 1) remove the tip. 2) For the loose flower spikes, 1/3 to 1/5 of the ear tips must be removed. 3) The large grain varieties should be properly removed. Kyoho varieties should be 20-30 grains per panicle.
4, Shuguo ear technical points: 1) can be identified when the ear can be carried out. 2) Determine the appropriate load according to shelf type, frame type, result volume, site conditions, and management level. 3) General large-spike varieties 1 to 2 spikes for each strong fruit, 2 to 3 panicles in the panicle type, and the spikelet type wine varieties can be appropriately left. Ears on weak fruits should generally be removed. 4) When using an updated pruning, the ear on the ready branch should generally be removed.
5. Technical Points for Detaching: 1) Remove tendrils on vines in time. 2) Concentrate the fallen tendrils. 3) If the tendrils are to be lignified, they can be cut and not hard-pulled.
6. Tips for tying vines: 1) When the length reaches 30 cm, the vines will be tied in time. 2) The new vine spreads on the surface as far as possible. 3) Adjust the vine angle according to the growth potential of the dendrite. The strong vines should be large in angle and the weak vines should be small. 4) When tying vines, live buttons are used at the branches to avoid twisting.
The main points of technology for top-dressing and watering in late May and early May: 1) Fertilizer types and fertilization amount will be determined according to the age, vigor, and state of the results. Nitrogen fertilizers may be topdressed for young trees and weak trees, and the resulting trees and strong trees may be topped with compound fertilizers. . The amount of fertilizer is generally 0.2-0.3 kg for young trees and 0.5-1.0 kg for mature trees. 2) The topdressing is best applied by furrows or holes, and evenly on both sides of the fence, or under the scaffolding. 3) Fertilization depth 15 to 20 cm, mix well with soil after application. 4) Potassium deficiency tree can be applied at this time potassium chloride or potassium sulfate, 0.2-0.5 kg per strain. 5) Watering immediately after fertilization. 6) Timely tillage and weeding after watering.
8, missing branches can engage in vine pressure processing technology points: 1) in the lack of vines to dig 30 cm deep ditch. 2) The adjacent plants are buried in the ditch, and the vine tip is exposed vertically upwards. 3) In order to promote multiple roots, it can be cut at the base of the vine. 4) Watering in time after burial.
9, cuttings management technology points: 1) seedlings grow to 30 to 40 cm when the stand. 2) The grape seedlings spray 200 times of green wind 95+0.3% urea every 10 days.
10. Management points of plastic canopy grapes: 1) Berry swells until the end of harvesting. The temperature inside the shed is maintained at 28-32°C during the day and at 15-17°C at night. The temperature difference between day and night is controlled above 10°C. Expand, color, increase sugar content. If the temperature is too high, the ventilation window, work door, and even the ceiling film can be cooled. If the temperature falls to the lower limit of the suitable temperature, the ventilation window door and the top membrane should be closed in time, even covering the straw curtain. The relative humidity should be maintained at 63-69%, not higher than 70%, so as to avoid the occurrence and spread of diseases. 2) Generally, when the outside temperature is high in late May, the film can be completely removed. 3) After spraying, spray the fertilizer once every 10 to 15 days, three times in total, and then spray 300 times of amino acid potassium once and 300 times of potassium dihydrogen phosphate 300 times twice. 4) When the berry matures, due to inconsistent maturity at different parts of the shed, it should be harvested in stages.
10. Pest control this month
1) Spike brown blight - before and after flowering is the main period of the disease. If it is more rainy at this time, the disease will occur severely, with yellow-brown streak appearing on the cob first. When the lesion expands around the axis, the cob will dry up. Serious illness can be lost more than 50%, 1.5% multi-mycin 300 to 400 times, 80% of M-45 wettable powder 600 to 800 times the liquid has a good preventive effect on the disease. 2) Bitter bitter disease - before the flowering, it is the initial stage of the disease. The young fruit is more rainy. The disease occurs more severely and only young shoots, leaves, tendrils and young fruit can be harmed. 80% Dasheng M-45 wettable powder 600 ~ 800 times liquid, 1:0.6: 160 Bordeaux liquid prevention effect is better. 3) Yellow leaf disease - If the amount of results in the first year is too large or if downy leaves cause early defoliation, serious yellow leaves can be seen in the early stages of leaf development. Slow growth of the diseased plants, less flowering, poor fruit setting. Strong disease Yekang 500 ~ 600 times better. 4) Botrytis cinerea—The flowering and young fruit are cold and rainy, and the disease is relatively easy to occur. The flowers and young fruit are gray and rot, with a gray moldy layer. 65% Wanxueling 800 times, 40% Shijiale 800 ~ 1000 times better. According to the actual conditions of the orchard, the appropriate pharmaceutical agents are used for prevention and treatment. The addition of 0.1% assist in the liquid can significantly improve the control effect.
2. Auxiliary tip processing technology points: 1) Every 7 to 10 days. 2) The method can be any one of the following: removal of axillary shoots below the ear; 1~2 leaves of axillary shoots for continuous picking of the hearts; 1~2 axillae at the top of shoots, and all others removed.
3, ear tips technical points: 1) remove the tip. 2) For the loose flower spikes, 1/3 to 1/5 of the ear tips must be removed. 3) The large grain varieties should be properly removed. Kyoho varieties should be 20-30 grains per panicle.
4, Shuguo ear technical points: 1) can be identified when the ear can be carried out. 2) Determine the appropriate load according to shelf type, frame type, result volume, site conditions, and management level. 3) General large-spike varieties 1 to 2 spikes for each strong fruit, 2 to 3 panicles in the panicle type, and the spikelet type wine varieties can be appropriately left. Ears on weak fruits should generally be removed. 4) When using an updated pruning, the ear on the ready branch should generally be removed.
5. Technical Points for Detaching: 1) Remove tendrils on vines in time. 2) Concentrate the fallen tendrils. 3) If the tendrils are to be lignified, they can be cut and not hard-pulled.
6. Tips for tying vines: 1) When the length reaches 30 cm, the vines will be tied in time. 2) The new vine spreads on the surface as far as possible. 3) Adjust the vine angle according to the growth potential of the dendrite. The strong vines should be large in angle and the weak vines should be small. 4) When tying vines, live buttons are used at the branches to avoid twisting.
The main points of technology for top-dressing and watering in late May and early May: 1) Fertilizer types and fertilization amount will be determined according to the age, vigor, and state of the results. Nitrogen fertilizers may be topdressed for young trees and weak trees, and the resulting trees and strong trees may be topped with compound fertilizers. . The amount of fertilizer is generally 0.2-0.3 kg for young trees and 0.5-1.0 kg for mature trees. 2) The topdressing is best applied by furrows or holes, and evenly on both sides of the fence, or under the scaffolding. 3) Fertilization depth 15 to 20 cm, mix well with soil after application. 4) Potassium deficiency tree can be applied at this time potassium chloride or potassium sulfate, 0.2-0.5 kg per strain. 5) Watering immediately after fertilization. 6) Timely tillage and weeding after watering.
8, missing branches can engage in vine pressure processing technology points: 1) in the lack of vines to dig 30 cm deep ditch. 2) The adjacent plants are buried in the ditch, and the vine tip is exposed vertically upwards. 3) In order to promote multiple roots, it can be cut at the base of the vine. 4) Watering in time after burial.
9, cuttings management technology points: 1) seedlings grow to 30 to 40 cm when the stand. 2) The grape seedlings spray 200 times of green wind 95+0.3% urea every 10 days.
10. Management points of plastic canopy grapes: 1) Berry swells until the end of harvesting. The temperature inside the shed is maintained at 28-32°C during the day and at 15-17°C at night. The temperature difference between day and night is controlled above 10°C. Expand, color, increase sugar content. If the temperature is too high, the ventilation window, work door, and even the ceiling film can be cooled. If the temperature falls to the lower limit of the suitable temperature, the ventilation window door and the top membrane should be closed in time, even covering the straw curtain. The relative humidity should be maintained at 63-69%, not higher than 70%, so as to avoid the occurrence and spread of diseases. 2) Generally, when the outside temperature is high in late May, the film can be completely removed. 3) After spraying, spray the fertilizer once every 10 to 15 days, three times in total, and then spray 300 times of amino acid potassium once and 300 times of potassium dihydrogen phosphate 300 times twice. 4) When the berry matures, due to inconsistent maturity at different parts of the shed, it should be harvested in stages.
10. Pest control this month
1) Spike brown blight - before and after flowering is the main period of the disease. If it is more rainy at this time, the disease will occur severely, with yellow-brown streak appearing on the cob first. When the lesion expands around the axis, the cob will dry up. Serious illness can be lost more than 50%, 1.5% multi-mycin 300 to 400 times, 80% of M-45 wettable powder 600 to 800 times the liquid has a good preventive effect on the disease. 2) Bitter bitter disease - before the flowering, it is the initial stage of the disease. The young fruit is more rainy. The disease occurs more severely and only young shoots, leaves, tendrils and young fruit can be harmed. 80% Dasheng M-45 wettable powder 600 ~ 800 times liquid, 1:0.6: 160 Bordeaux liquid prevention effect is better. 3) Yellow leaf disease - If the amount of results in the first year is too large or if downy leaves cause early defoliation, serious yellow leaves can be seen in the early stages of leaf development. Slow growth of the diseased plants, less flowering, poor fruit setting. Strong disease Yekang 500 ~ 600 times better. 4) Botrytis cinerea—The flowering and young fruit are cold and rainy, and the disease is relatively easy to occur. The flowers and young fruit are gray and rot, with a gray moldy layer. 65% Wanxueling 800 times, 40% Shijiale 800 ~ 1000 times better. According to the actual conditions of the orchard, the appropriate pharmaceutical agents are used for prevention and treatment. The addition of 0.1% assist in the liquid can significantly improve the control effect.
[Composition]
The main component of this preparation is human immunoglobulin, which is prepared by cold ethanol fractionation of human plasma from healthy donors. The manufacturing process contains a step to remove anticomplementary activity and a dual viral inactivation process. It contains a suitable amount of glucose or maltose as stabilizer (see table below), but does not contain any antiseptic or antibiotic. The distribution of IgG subclasses is close to the serum level of normal subjects and maintains the bioactivity of Fc fragment of IgG.
[Indications]
1. Primary
agammaglobulinemia, such as X-linked hypogammaglobulinemia,
common variant immunodeficiency diseases, immunoglobulin G subclass deficiency,
etc.
2. Secondary
immunoglobulin deficiency diseases, such as severe infection, septicemia of
newborn, etc
Intravenous Injection Of Human Immunoglobulin
Intravenous Injection Of Human Immunoglobulin,Intravenous Immunoglobulin,High-Quality Effective Intravenous Immunoglobulin,Human Immunoglobulin For Intravenous Injection
Sichuan Yuanda Shuyang Pharmaceutical Co., Ltd. , https://www.syimmunoglobulin.com