MS-T series distilled water machine working principle
The process of the MS-T series multi-effect distilled water machine is as follows: the raw water is heated by the industrial steam in the first effect preheater, and after entering, the various effect preheaters are further heated by the secondary steam; the condenser is heated by the secondary steam and the distilled water; Then, at the top of the evaporator, the water distribution device is evenly distributed into the evaporation column tube to form a film-like water flow in the evaporation column tube; these water streams are quickly evaporated due to the thinness, generating secondary steam; the raw material water that is not evaporated is Delivered to the next effect, as the raw material water of the secondary effect evaporator, the subsequent effects are similar, and the next effect is not evaporated, until the effect is still not evaporated after the Zui, it will be discharged as condensed water; The raw water, now the secondary steam, continues to spiral up in the evaporator, through the middle and upper special separation device, into the pure steam pipeline, as a secondary heat source; the secondary steam is condensed after the secondary effect is absorbed heat Distilled water; each effect process is similar, the distilled water of each effect and the secondary steam of the last effect are collected by the condenser, and exchange heat with the cooling water and the raw material water to be cooled to become distilled water; On-line testing, qualified distilled water is used as water for injection, and unqualified distilled water will be discharged.
The secondary steam converted from raw water is clean steam, which undergoes three separations: after entering the evaporator at the beginning of the Zui, it flows down the column tube and simultaneously evaporates, which is * times separation; the evaporated raw water (secondary Steam) is folded back 180 degrees at the lower end of the evaporator, and the impurities are separated into the lower part by gravity. This is the second separation; the evaporated raw water, ie the secondary steam, continues to spiral up in the evaporator to the middle. At the upper special separation device, a third separation is performed. The cooling water is only passed through the condenser, and the distilled water and the secondary secondary steam generated by each effect are cooled. The industrial steam heats the raw material water in an evaporator and a preheater, and the heat is absorbed and becomes condensed water discharged outside the machine. In the condenser, there is a part of gas which cannot be condensed into water, which is called a non-condensable gas, and this part of the gas will be removed by a discharge device installed at the upper portion of the condenser. Depending on the model, a continuous discharge of non-condensable gas may also be provided on each effect evaporator.
1. Industrial steam 2. Condensate water discharge 3. Concentrated water discharge 4. Non-condensable gas discharge 5. Raw material water inlet 6. Cooling water MS-S series distilled water machine working principle
The process of MS-S series multi-effect distilled water machine is as follows: the raw water is heated by industrial steam condensate in one effect preheater, and after entering, each effect preheater is heated by condensed water (distilled water) of secondary steam; The secondary steam and the distilled water are heated; then, the top of the evaporator is uniformly distributed into the evaporation column through the water dividing device, and a film-like water flow is formed in the evaporation column; the water flow is quickly evaporated due to the thinness, and secondary steam is generated; The raw water that has not been evaporated is transported to the next effect, and is used as the raw material water of the secondary effect evaporator. The subsequent effects are similar, and the next effect is not evaporated, until the effect is not evaporated after the Zui, As condensed water discharge; the evaporated raw material water, now secondary steam, continues to spiral up in the evaporator, through the middle and upper special separation device, into the pure steam pipeline, as a secondary heat source; secondary steam in the second The effect is absorbed by the heat and then condensed into distilled water; the effect process is similar. The distilled water and the final secondary steam of each effect are collected by the condenser and exchange heat with the cooling water and the raw material water to be cooled. It is distilled water; after the on-line detection of conductivity, qualified distilled water is output as water for injection, and unqualified distilled water will be discharged.
The secondary steam converted from raw water is clean steam, which undergoes three separations: after entering the evaporator at the beginning of the Zui, it flows down the column tube and simultaneously evaporates, which is * times separation; the evaporated raw water (secondary Steam) is folded back 180 degrees at the lower end of the evaporator, and the impurities are separated into the lower part by gravity. This is the second separation; the evaporated raw water, ie the secondary steam, continues to spiral up in the evaporator to the middle. At the separation device, a third separation is performed.
The cooling water is only passed through the condenser, and the distilled water and the secondary secondary steam generated by each effect are cooled. The industrial steam heats the raw material water in the *effect evaporator, and the condensed water heats the raw material water in the *effect preheater, and the heat is absorbed and becomes the condensed water discharged outside the machine. In the condenser, there is a part of gas which cannot be condensed into water, which is called a non-condensable gas, and this part of the gas will be removed by a discharge device installed at the upper portion of the condenser. Depending on the model, such a non-condensable gas continuous discharge device may also be provided on each effect evaporator.
1. Industrial steam 2. Condensate water discharge 3. Concentrated water discharge 4. Non-condensable gas discharge 5. Raw material water inlet 6. Cooling water 7. Distilled water
The process of the MS-T series multi-effect distilled water machine is as follows: the raw water is heated by the industrial steam in the first effect preheater, and after entering, the various effect preheaters are further heated by the secondary steam; the condenser is heated by the secondary steam and the distilled water; Then, at the top of the evaporator, the water distribution device is evenly distributed into the evaporation column tube to form a film-like water flow in the evaporation column tube; these water streams are quickly evaporated due to the thinness, generating secondary steam; the raw material water that is not evaporated is Delivered to the next effect, as the raw material water of the secondary effect evaporator, the subsequent effects are similar, and the next effect is not evaporated, until the effect is still not evaporated after the Zui, it will be discharged as condensed water; The raw water, now the secondary steam, continues to spiral up in the evaporator, through the middle and upper special separation device, into the pure steam pipeline, as a secondary heat source; the secondary steam is condensed after the secondary effect is absorbed heat Distilled water; each effect process is similar, the distilled water of each effect and the secondary steam of the last effect are collected by the condenser, and exchange heat with the cooling water and the raw material water to be cooled to become distilled water; On-line testing, qualified distilled water is used as water for injection, and unqualified distilled water will be discharged.
The secondary steam converted from raw water is clean steam, which undergoes three separations: after entering the evaporator at the beginning of the Zui, it flows down the column tube and simultaneously evaporates, which is * times separation; the evaporated raw water (secondary Steam) is folded back 180 degrees at the lower end of the evaporator, and the impurities are separated into the lower part by gravity. This is the second separation; the evaporated raw water, ie the secondary steam, continues to spiral up in the evaporator to the middle. At the upper special separation device, a third separation is performed. The cooling water is only passed through the condenser, and the distilled water and the secondary secondary steam generated by each effect are cooled. The industrial steam heats the raw material water in an evaporator and a preheater, and the heat is absorbed and becomes condensed water discharged outside the machine. In the condenser, there is a part of gas which cannot be condensed into water, which is called a non-condensable gas, and this part of the gas will be removed by a discharge device installed at the upper portion of the condenser. Depending on the model, a continuous discharge of non-condensable gas may also be provided on each effect evaporator.
1. Industrial steam 2. Condensate water discharge 3. Concentrated water discharge 4. Non-condensable gas discharge 5. Raw material water inlet 6. Cooling water MS-S series distilled water machine working principle
The process of MS-S series multi-effect distilled water machine is as follows: the raw water is heated by industrial steam condensate in one effect preheater, and after entering, each effect preheater is heated by condensed water (distilled water) of secondary steam; The secondary steam and the distilled water are heated; then, the top of the evaporator is uniformly distributed into the evaporation column through the water dividing device, and a film-like water flow is formed in the evaporation column; the water flow is quickly evaporated due to the thinness, and secondary steam is generated; The raw water that has not been evaporated is transported to the next effect, and is used as the raw material water of the secondary effect evaporator. The subsequent effects are similar, and the next effect is not evaporated, until the effect is not evaporated after the Zui, As condensed water discharge; the evaporated raw material water, now secondary steam, continues to spiral up in the evaporator, through the middle and upper special separation device, into the pure steam pipeline, as a secondary heat source; secondary steam in the second The effect is absorbed by the heat and then condensed into distilled water; the effect process is similar. The distilled water and the final secondary steam of each effect are collected by the condenser and exchange heat with the cooling water and the raw material water to be cooled. It is distilled water; after the on-line detection of conductivity, qualified distilled water is output as water for injection, and unqualified distilled water will be discharged.
The secondary steam converted from raw water is clean steam, which undergoes three separations: after entering the evaporator at the beginning of the Zui, it flows down the column tube and simultaneously evaporates, which is * times separation; the evaporated raw water (secondary Steam) is folded back 180 degrees at the lower end of the evaporator, and the impurities are separated into the lower part by gravity. This is the second separation; the evaporated raw water, ie the secondary steam, continues to spiral up in the evaporator to the middle. At the separation device, a third separation is performed.
The cooling water is only passed through the condenser, and the distilled water and the secondary secondary steam generated by each effect are cooled. The industrial steam heats the raw material water in the *effect evaporator, and the condensed water heats the raw material water in the *effect preheater, and the heat is absorbed and becomes the condensed water discharged outside the machine. In the condenser, there is a part of gas which cannot be condensed into water, which is called a non-condensable gas, and this part of the gas will be removed by a discharge device installed at the upper portion of the condenser. Depending on the model, such a non-condensable gas continuous discharge device may also be provided on each effect evaporator.
1. Industrial steam 2. Condensate water discharge 3. Concentrated water discharge 4. Non-condensable gas discharge 5. Raw material water inlet 6. Cooling water 7. Distilled water
Portable Sprinkler irrigation system
Portable Sprinkler Irrigation System mainly used for Farmland irrigation, fruit and grass irrigation,Sugarcane sprinkler irrigation, power plants precipitation, factory and port dust removal.
Portable Sprinkler irrigation system available with multiple nozzles, allowing watering and misting options, irrigation booms are adaptable to any crop. Depending on the boom selected, multiple zones can be irrigated with one boom, allowing the grower to effectively grow multiple crops in one house. All booms can be controlled independently or through computerized controls.
Portable Sprinkler Irrigation System,Portable Drip Irrigation,Portable Irrigation System,Portable Sprinkler Irrigation
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.skyplantgreenhouse.com