Routine maintenance management regulations for laboratory equipment
- Clicks: 932 Release time: 2009/9/25
The daily maintenance and maintenance of equipment and equipment is an important part of equipment technology management. Its purpose is to prolong the service life of equipment and maintain its good performance and precision. It is the preventive and protective function of Zui to ensure the normal operation of equipment. The measures are the basis for ensuring the normal and smooth progress of laboratory teaching and scientific research in our university. All laboratories must attach great importance to this, and this method is specially formulated for this purpose:
* Articles and laboratories must establish a strict post responsibility system. According to the characteristics and requirements of the instruments and equipment used, the corresponding maintenance measures should be formulated and implemented conscientiously so that the maintenance of the equipment and equipment can be regularized and institutionalized.
Article 2: It is necessary to strengthen the basic operation training for teachers, experimental technicians and students so that they are familiar with the performance characteristics of instruments and equipment, master the basic operation methods, and avoid damage accidents caused by improper operation or mistakes, especially the use of large-scale precision instruments and equipment. It is necessary to strictly implement the system of holding a certificate, and it is strictly forbidden to operate large-scale precision instruments without training or unqualified personnel.
Article 3: Instruments and equipment that need to be stored for a period of time for inventory, standby or due to insufficient tasks should be regularly cleaned, checked, and protected from dust, rust and moisture.
Article 4, Maintenance Requirements for Common Instruments and Equipment
1 Electronic equipment
a. Very electronic equipment should be cleaned regularly, dusted, and regularly energized to prevent components from being damaged by moisture.
b. Regularly perform part inspection and performance testing to understand the technical status and ensure that the equipment is always in good working condition.
c. Equipment that uses a rechargeable battery to maintain its data or program internally and should be powered on regularly.
1 Mechanical equipment should be cleaned, lubricated, rust-proof, dust-proof, moisture-proof, anti-corrosive, etc.
2 Laboratory environmental conditioning equipment
a. The anti-submersible filter of the air conditioner indoor unit and the dehumidifier should be cleaned at least once every two months, and the outdoor unit should be regularly maintained and cleaned to improve the heat dissipation effect. This is both a need to improve efficiency and effectiveness, and a need to prevent overload-induced fires and damage to equipment.
b. The ceiling fan and fan in the laboratory should be cleaned regularly, dusted and lubricated.
Self-Diagnosis Mask Machine,Disposable Mask Packing Machine,Data Printer Packaging Machine,Packaging Machine With Bagging Device
Wuxi Kanghe Medical Consulting Co., Ltd. , https://www.jskanghe.com