Export muddy transport method

First, the production of the loading tool is welded to a basket-shaped bracket with a height of 0.8m and a height of about 3m2. The basket mouth is loaded with a canvas bag of the same size, and the aluminum buckle holes and the mouths of the canvas bag are used with nylon ropes. The iron bars on each side are entwined. The canvas bag was removed before drying to extend the use time. Bags of this capacity can carry 1 ton of loach at a time.
Second, transport vehicles are shipped by ocean-going vessels or small vessels. Put the basket on the stern deck and windbreaks drive seawater into the canvas bag.
Third, the shipping method Muddy, often produce a lot of mucus bubble, and will not disappear for a long time. Therefore, the foam on the surface of the bag should be removed in time after loading into the loach, so as to avoid water and air isolation. Change the water every 48 hours during transportation. When the temperature exceeds 35°C, add appropriate amount of ice cubes to the bag to reduce the water temperature.
When transported in canvas bags, the mortality rate of loach was below 2%, and the death rate was more than double that of nylon bags. Its delivery tools are simple, not only reusable, but also a more economical method of transportation.

Posted on