In order to achieve the test conditions, it is inevitable to humidify and dehumidify the test chamber. This paper intends to analyze a large number of various methods currently used in the damp heat test chamber, pointing out their respective advantages and disadvantages. And recommended conditions.
Humidity is expressed in many ways. In the case of test equipment, the concept of relative humidity is often used to describe humidity. Relative humidity is defined as the ratio of the water vapor pressure in the air to the saturated vapor pressure of water at that temperature and is expressed as a percentage. It is known from the nature of water vapor saturation pressure that the saturation pressure of water vapor is only a function of temperature. It is independent of the air pressure at which water vapor can be used. Through a large number of experiments and collation, people have found a relationship between water vapor saturation pressure and temperature, which has been A large amount of measurement should be adopted by the Goffeglie formula. It is used by the current meteorological department to compile a humidity checklist.
The process of humidification is actually to increase the partial pressure of water vapor. The initial humidification method of Zui is to spray water to the test chamber wall, and the water surface saturation pressure is controlled by controlling the water temperature. The water on the surface of the tank wall forms a large surface on which the water vapor pressure is added to the tank by means of diffusion to increase the relative humidity in the test chamber. This method appeared in the 1950s. Since the control of humidity at that time is mainly a simple switchover adjustment of the mercury-electric contact type conductivity meter, the control of the water temperature of the hot water tank with large hysteresis is poor, so the transition process of the control is long and cannot meet the alternating heat and humidity. The need for more humidification, and more importantly, when spraying the wall of the tank, it is inevitable that water droplets will drip on the sample to form different degrees of contamination on the sample. At the same time, there are certain requirements for the drainage inside the box. Therefore, we used steam humidification and shallow water pan humidification in the early stage. Although its control transition process is long, the humidity fluctuation is small after the system is stable, which is more suitable for constant damp heat test. In addition, the moisture does not heat up during the humidification process and does not increase the extra heat in the system. Also, when the temperature of the spray water is controlled to be lower than the point temperature required for the test, the spray water has a dehumidification effect.
As the damp heat test develops from constant damp heat to alternating damp heat, a relatively fast humidification reaction capability is required. When spray humidification is no longer satisfactory, steam humidification and shallow pan humidification methods are widely adopted and developed.
Box Mod
Box MOD of Various of products, including Wood Box Mod,Aluminum Box Mod,Brass Box Mod,Copper Box Mod and Stainless steel Box Mod with various colors, provide product pictures and basic parameters, we are committed to supply chain management, we are a professional Chinese manufacturer of Mechanical Mods Kit and we are looking forward to your cooperation.
Box Mod Vape,Thick Smoke Vape,Mod Box Kit Vape,Original Mod Vape
Dongguan Marvec Electronic Technology Co.,Ltd , http://www.marvec-cn.com