Kids Rehab Walking Balance Rehabilitation Equipment, Children Rehabilitation Equipment

Kids Rehab Walking Balance Rehabilitation Equipment ,Children Rehabilitation Equipment

Children Gait Training  device

MED-XYRT-1

Specification of the gait training equipment:

1.Overview
1.1       Applications:
The product is used for children to train walk because of their lower limbs disability, pains and spasm caused by bone joints diseases or nervous system dysfunction, controlled by hanging belts to lighten patient's lower limbs to bear avoirdupois ability so as to ensure safety as walking, to help patient do gait function training as early as possible.
1.2       Structure and parameter
  structure:the product is composed of Rack,upright column,Handrail,base frame,handle,hanging belt and so on.
Parameter
Dimension:(cm)85x71x58
The upright column adjustment rang:0~30cm
The handrail adjustment rang:60~120cm
Handrail height:50cm
2. Application Method
 2.1 When the trainer is training, he should be with the help of the therapist or nusing staff, and all the components should be adjusted properly.
 2.2.When the trainee hold the handle, the nursing staff should help the trainee to stand and insert the hung belt into the insurance opening, swing the handle clockwise,the lifting pillar rises gradually so the weight is reduced and easy to bear, then have the gait training.
2.3 As ability of the load-bearing and the walking strengthens ,the height of the upright can be adjusted at the same time.
 2.4 After the training is finished ,the therapist or nursing swing the handle counter-clockwise ,make the upright at the lowest position , unfix the load-bearing belt help the trainee into the wheelchair and leave
3. Matters need Attention
3.1 Read the "User's Guide" carefully before using, be familiar with the product function, requirements and application method check the operation with no-load make sure the standing frame work well and then put it into use.
 3.2 Please take ordered training with help of physical therapist or nursing staff according to the trainee's body condition.
 3.3 The training should be in the principle of "step-by-step".
 3.4 The belt must be inserted into the insurance completely.
3.5 If the load-bearing belt is out of order, change it in time.
 3.6. The training should be done at the plain ground.
 
Welcome to contact us for the gait training equipment.
 
Kids Rehab Walking Balance Rehabilitation Equipment ,Children Rehabilitation Equipment

Children Gait Training  device

MED-XYRT-1

Specification of the gait training equipment:

1.Overview
1.1       Applications:
The product is used for children to train walk because of their lower limbs disability, pains and spasm caused by bone joints diseases or nervous system dysfunction, controlled by hanging belts to lighten patient's lower limbs to bear avoirdupois ability so as to ensure safety as walking, to help patient do gait function training as early as possible.
1.2       Structure and parameter
  structure:the product is composed of Rack,upright column,Handrail,base frame,handle,hanging belt and so on.
Parameter
Dimension:(cm)85x71x58
The upright column adjustment rang:0~30cm
The handrail adjustment rang:60~120cm
Handrail height:50cm
2. Application Method
 2.1 When the trainer is training, he should be with the help of the therapist or nusing staff, and all the components should be adjusted properly.
 2.2.When the trainee hold the handle, the nursing staff should help the trainee to stand and insert the hung belt into the insurance opening, swing the handle clockwise,the lifting pillar rises gradually so the weight is reduced and easy to bear, then have the gait training.
2.3 As ability of the load-bearing and the walking strengthens ,the height of the upright can be adjusted at the same time.
 2.4 After the training is finished ,the therapist or nursing swing the handle counter-clockwise ,make the upright at the lowest position , unfix the load-bearing belt help the trainee into the wheelchair and leave
3. Matters need Attention
3.1 Read the "User's Guide" carefully before using, be familiar with the product function, requirements and application method check the operation with no-load make sure the standing frame work well and then put it into use.
 3.2 Please take ordered training with help of physical therapist or nursing staff according to the trainee's body condition.
 3.3 The training should be in the principle of "step-by-step".
 3.4 The belt must be inserted into the insurance completely.
3.5 If the load-bearing belt is out of order, change it in time.
 3.6. The training should be done at the plain ground.
 
Welcome to contact us for the gait training equipment.
 

Our company manufactures many kinds of Pet Feeding Accessories. Such as the Pet Scoops, pet bowels and feeders and Pet Drinking Bottles. The Pet Bowls can be customized. They are made of silicon and PP plastic with different styles to choose from. Their functions are drinking water or eating food. The customers can also OEM their dog`s or cat`s name on the surface of the bowls or bottles. 

Pet Bowls & Feeders

Pet Bowls,Pet Feeders,Feed Dog Bowl,Pet Bowl For Dogs

Yangzhou Huating Brush Co., Ltd. , http://www.huatingbrush.com