1. Maintenance and maintenance of the harvester 1. Inspection: Check and repair the cutter of the harvester, check whether the movement of the movable and static blades is flexible, whether there is warping damage, check the damage of the guard, and repair the damaged parts. Or replace it and adjust it to restore the machine to its normal state. Check the transmission parts. Check the tightness of the conveyor belt, whether it is damaged or not, and whether the operation is normal. Check the connection parts. 2. Cleaning: Clean the dust, weeds and other debris of the harvester regularly to keep the machine clean and ensure the normal operation of the machine. 3. Lubrication: Lubricate all moving parts as required. Second, use and safe operation 1. Before use, should turn the shaft by hand to check whether the various parts are flexible. Then run at low speed for 10 to 15 minutes. 2. It is forbidden to carry out inspection, maintenance, adjustment and maintenance while the equipment is in operation. 3. When harvesting, determine the reasonable working speed based on the crop production density. Then, after the harvester is operated to this speed, it will be harvested and straightened as far as possible so that the tiller will not overwhelm the crop. 4. According to crop lodging conditions, wind direction; plot size, determine the harvest direction. In general, lodging should be carried out against the wind. 5. If it is found that there is dew in the morning or evening, or when the crop is wet after the rain, harvesting should not be carried out to avoid damage to the implement. 6. Clean the weeds and soil in time in order to avoid blocking the knife and affect the operation. 7. According to the ground conditions, determine the cutting height; when encountering obstacles such as ditch, pit, and stones, raise the header. 8. When transferring plots and transportation, the harvester should be set up and the tractor should drive at low speed. 9. When the work is stopped and stopped, the harvester should be put down to prevent accidents. lO. After the harvester is used, it should be upholstered and lubricated. It should be parked in the storage shed to prevent wind and rain, and the natural rust will cause damage.
Red beet powder is a vegetable powder made of red beet after drying and dehydration, and then machine-processed and powdered. Red beets are rich in nutrients and contain crude protein, soluble sugar, crude fat, dietary fiber, vitamin C, niacin, etc., and minerals such as potassium, sodium, magnesium, iron, calcium, zinc, manganese, and copper. Red beetroot powder is rich in potassium, phosphorus and easily digested and absorbed sugar.
Dehydrated Beet Powder,Food Grade Beetroot Powder,Homemade Beetroot Powder,Pure Red Beetroot Powder
Laian Xinshuyu Food Co., Ltd , https://www.xinshuyufood.com