What are the things to be aware of when storing the granules of the granules?

The main component of the granule granule machine is the granule machine ring mold. The granule machine ring mold plays a vital role in the granule machine production granule molding. What are the matters needing attention when storing the granule machine ring mold?

After six months of storage of the biomass pellet ring mold, the oily filler inside must be replaced with a new one, because the material inside will be hardened after a long period of storage, and the biomass pellet machine will not be pressed when it is used again, resulting in Block the machine.

The granules of the granules should always be placed in a dry, clean and ventilated place. If it is not used for a long time, it can be coated with a layer of waste engine oil to prevent moisture in the air. Generally, there are many raw materials for production in the production workshop. It is forbidden to place the ring mold of the pellet machine in these places, because the material is particularly easy to absorb moisture and is not easy to disperse. If it is put together with the particle machine ring mold, it will speed up the particle machine ring mold. Corrosion, which affects its service life.

For the entire equipment of the granule granulator , because it is a kind of equipment for production, it can achieve good efficiency when used, and it can greatly increase the amount of production, so naturally it The efficiency that can be achieved when using it is the first requirement. For the use of this product, how can it be used to achieve efficiency when it is used? The first aspect is that when you use it, you have to let yourself achieve the advantages of the design. Only in this way will it achieve a good advantage when it is used.

Another point is that in the whole production of biomass pellet machine, it is also to achieve a good technical advantage, because when used, the performance of the pelletizer on the product can achieve good stability, the first is It depends on what kind of process performance the equipment is in production, because if it is an efficient performance at the speed of the product, but also in use, it must also achieve good long-term efficiency, and it In your own use, being able to achieve good craftsmanship is also a guarantee of its efficiency.